| Technical Indicators | Name | |
| Laser Parameters | laser source | Raycus/JPT/IPG(optional) |
| Laser Wavelength | 1064nm | |
| Average Output Power | 30w | |
| Modulation Frequency Range | 30kHz-60Khz(20w/30w); 50khz-100khz(50w) | |
| Galvometer Parameters | Maximum Linear Speed | 7000mm/s |
| Resolution | 12μrad | |
| Repeatability | 8μrad | |
| Optiocal output characteristics | Marking Range | 110x110mm |
| Minimum Line Width | 0.01mm | |
| Minimum Character height | 0.2mm | |
| Cooling System | Cooling Method | Air Cooling |
| Systen Property | Laser power | 0.5kw/AC220V(110V optional) |
| LTower height | 50cm/80cm | |
| Environment Requirement | 0-35ºC | |
| brass marking | https://youtu.be/bieldrdDPP0 |
| Jewelry ring marking | https://youtu.be/ZSgs1BphpUk |
| Jewelry ring cutting | https://youtu.be/V2WM4DrAG_Y |
| stainless steel marking | https://youtu.be/oX7pJrggGgs |
| Carbon steel marking | https://youtu.be/1L_mpHLIOg4 |
Fiber laser marker can mark on almost any metal.
It can also cut some thin jewelry plate.
30w cut up to 0.5mm gold/silver/brass.
50w cut up to 1-1.2mm gold/silver/brass.
If thicker than this thickness,it is also ok,but it takes much longer time to do it.
Ply-wood case:99*62*106cm,120kg/154kg
