|Laser power||20w /30w /50w|
|Laser wave length||1064nm|
|Sandard marking area||110*110mm|
|Optional marking area||200*200 300*300 customerized aviliable|
|Output laser beam quality||M²≤2|
|Focus spot diameter||< 0.01mm|
|Control interface||Standard USB port|
|Graphic format supported||BMP,JPG,AI,PLT,DST,DWG ETC.|
date marking,batch number,serial number etc
|Cooling way||Built-fan for air cooling|
|Working voltage||220V-50Hz(single phase)or 110V-60Hx(single phase)|
|Computer||Including laptop cpmputer per set(software installed)|
|Laser marking oftware||Ezcad(English version)|
|Working environment||Clean and dust-free or dust less|
|Working condition||5%~75%,free of condensed water|
|Optional device||Rotary marking attachment ;X/Y adjustable table|
2.Long lifetime: Adopt advanced fiber generator, the life time could up to 100,000 hours.
3.High Precision Re-position precision is 0.001mm.
4.Low consumption: It is environment-protecting and energy-saving, power consumption is reduced
by 3-10 times compared with YAG laser. Using cost is really cheap.
5.Maintenance-free: The machine is maintenance-free, there is almost no any parts need to change after long term use.
6. Easy operation: The machine is very easy to use, and even the fresh man can use it well.
Identify each component with text, logo, serial number, graphics, etc.:
cutting tools, plumbing fixtures, cooking appliances, electrical connectors…
Mark by coating removal or mark on cast, rough surfaces:
ID plates, pistons, plastic casings, engine parts…
1.The warranty for whole machine is effective 3 years from the ExFactory Date.
But for the laser tube and focus lens and the reflective mirrors, the warranty is 3months.this is the
warranty of the manufacture to us.
2. We will send you the spare parts and offer tech support for free during warranty
when there is a machine fault including the part fault.
3. We have 10-years experience engineer, could teach you how to use and maintenance the machine,
and could keep contact any time.
4. Our tech is 24hours answer your question on trade manager if need .